Contents
Index
Loading table of contents...
Magnetic Stripe Reader
How do I...
Troubleshooting
Classic Line Series
OPOS Drivers
Troubleshooting
PS/2 Interface
My computer beeps and some card data is missing
My credit card software says that the card data is invalid
It takes several swipes before the credit card reader reads the card properly
The card reader does not beep when powered on, and appears dead
The card reader does not work with my credit card authorization software
My card will not read
Some of the characters of my card data are garbled or incorrect
My computer gets a keyboard error while booting up
My card has more data on it than my software is expecting
My Caps Lock LED on my keyboard flickers when I read a card
My reader does a strange high-low beep and does not output my card data
I can't activate the Setup Mode on my PS2 Keyboard Wedge Card Reader
The Card Reader beeps, but no data is displayed on my computer
My programmable keyboard fails to program when the Card Reader is installed
USB Interface
My computer beeps and some card data is missing
My credit card software says that the card data is invalid
It takes several swipes before the credit card reader reads the card properly
The card reader does not beep when powered on, and appears dead
The card reader does not work with my credit card authorization software
My card will not read
Some of the characters of my card data are garbled or incorrect
My card has more data on it than my software is expecting
My reader does a strange high-low beep and does not output my card data
The Card Reader beeps, but no data is displayed on my computer
How do I...
send termination string after each track
output ACCT,NAME,EXP DATE
output a single track only
remove start and end sentinels
USB Interface
Keep keyboard keystrokes from being put in my card data
PS/2 Interface
transmit card data on RS232 port
put my card reader back into keyboard wedge mode
configure the card reader for my software
Amigo POS
BizTracker Software
Checkpoint Systems Software
Client Magic Software
IC Verify
MAS 90
Microsoft Dynamics - Point of Sale
PawnMaster
PC Charge
PeachTree Premium Accounting Software
QuickBooks
Value Line Series
OPOS Drivers
Troubleshooting
PS/2 Interface
My computer beeps and some card data is missing
My credit card software says that the card data is invalid
It takes several swipes before the credit card reader reads the card properly
The card reader does not beep when powered on, and appears dead
The card reader does not work with my credit card authorization software
My card will not read
Some of the characters of my card data are garbled or incorrect
My computer gets a keyboard error while booting up
My card has more data on it than my software is expecting
My Caps Lock LED on my keyboard flickers when I read a card
My reader does a strange high-low beep and does not output my card data
I can't activate the Setup Mode on my PS2 Keyboard Wedge Card Reader
The Card Reader beeps, but no data is displayed on my computer
My programmable keyboard fails to program when the Card Reader is installed
USB Interface
My computer beeps and some card data is missing
My credit card software says that the card data is invalid
It takes several swipes before the credit card reader reads the card properly
The card reader does not beep when powered on, and appears dead
The card reader does not work with my credit card authorization software
My card will not read
Some of the characters of my card data are garbled or incorrect
My card has more data on it than my software is expecting
My reader does a strange high-low beep and does not output my card data
The Card Reader beeps, but no data is displayed on my computer
How do I...
output multiple card formats
send termination string after each track
output ACCT, EXP DATE
output a single track only
remove start and end sentinels
USB Interface
Keep keyboard keystrokes from being put in my card data
PS/2 Interface
transmit card data on RS232 port
put my card reader back into keyboard wedge mode
configure the card reader for my software
Amigo POS
BizTracker Software
Checkpoint Systems Software
Client Magic Software
IC Verify
MAS 90
Microsoft Dynamics - Point of Sale
PawnMaster
PC Charge
PeachTree Premium Accounting Software
QuickBooks
Universal Programming Software
What is it?
Where can I get it?
Universal programming software doesn't display a window.
Bar Code Decoder
How do I...
transmit bar code data on a RS232 port
put my decoder back into keyboard wedge mode
configure my decoder to automatically scan for bar codes without a trigger?
read reverse image bar codes, such as those eteched in glass
Troubleshooting
My computer beeps and some of my bar code data is missing.
Some of the characters of my bar code are garbled or incorrect.
My bar code cannot be read by the decoder.
My computer gets a keyboard error while booting up.
My Caps Lock LED on my keyboard flickers when I read a bar code.
I can't activate the Setup Mode on the decoder.
The decoder beeps, but no data is displayed on my computer.
My programmable keyboard fails to program when the decoder is installed.
Bar Code Slot Reader
How do I...
transmit bar code data on a RS232 port
put my slot reader back into keyboard wedge mode
setup my bar code slot reader to output different card formats
configure my slot reader to only read my cards and not all bar coded cards
Troubleshooting
My computer beeps and some of my bar code data is missing.
Some of the characters of my bar code are garbled or incorrect.
My bar code badge cannot be read by the slot reader.
My computer gets a keyboard error while booting.
My Caps Lock LED on my keyboard flickers when I read a bar code.
I can't activate the setup mode on the bar code slot reader.
The slot reader beeps, but no data is displayed on my computer.
My programmable keyboard fails to program when the slot reader is installed.
AnyLabel for Windows
Troubleshooting
cannot move a guide that is displayed in the label window.
unable to move an object; it will not select.
cannot rotate an object with the Rotation Tool.
When I try to select an object, a different object is selected.
When working with a label file that contains a large picture, the auto save starts and takes a long time to complete
When creating a text field from a database, you want the City, State, and ZIP code displayed on one line.
How can I draw a straight line?
When working on a label file that has a database selected, I cannot open the database from my database program.
When I attempt to use a Merge File, AnyLabel only displays the first record on my labels.
Bar Code Questions
When printing a bar code, it runs into another object on the label.
When entering data for my bar code, I keep getting error messages about invalid data.
I want to format the human readable text for my UCC-128 bar code separate from the data encoded in the bar code.
The bar codes that are generated by AnyLabel are not encoded with the exact data that I entered.
My bar codes appear on the label but they disappear when I print the label file.
Text Questions
When I print my address text, some of the addresses are word-wrapped and flow off of the label.
I want to create a text field with a 3 inch font. How many points are in 3 inches?
Picture Questions
When printing an imported picture, the picture is distorted.
Printing Questions
When I print, the page size is not correctly selected on the printer.
I get a message about blank labels when I print, and a blank page is ejected from my printer.
When printing labels, I have an object that appears on one label only, when it should appear on all labels.
When I print my labels, the pictures on the labels are not printed.
When printing, my date and time fields do not have the correct date and time.
When I print my labels, not all of the objects are printing.
When I print labels on my HP LaserJet, I get a Clipped objects message and my single character text field does not print.
When I print my labels, everything prints fine except the objects are not positioned correctly on the labels.
My bar codes appear on the label but they disappear when I print the label file.
USB Keyboard Accelerator
What is it?
Welcome
Installation
Settings
Library
Define Format
Enter Sample Data
Define Record
Define Parsings
Parsing Conditions
Define Fields
Define Outputs
Define Filters/Edits
Special Characters Table
Frequently asked Questions
USB Virtual COM Driver
What is it?
Welcome
Installation
Settings
Library
Define Format
Enter Sample Data
Define Record
Define Parsings
Parsing Conditions
Define Fields
Define Outputs
Define Filters/Edits
Special Characters Table
Frequently asked Questions
HID Technical Reference
What is it?
Magnetic Stripe Reader
