QuickBooks

QuickBooks Point of Sale and Credit Card Processing Kit software allow you to process credit cards during your standard day to day operations.

Both our PS/2 and USB Interface card readers will work with their software at default. If however your reader has been modified and does not work properly with QuickBooks Point of Sale and Credit Card Processing Kit software you may follow these steps to configure them to work.

PS/2 Interface

Steps: With your keyboard connected to the card reader and using Windows notepad or some other program you can type in, follow these steps:

<Left Ctrl> <CapsLock> <Right Shift> <Backspace> This will display the prompt "Press F1-F10 for options"
Now press the F10 and the reader will display "Reset All Defaults: Yes"
Press the <Enter> key to reset unit.
Now press and hold down the following keys: <Left Ctrl> <Escape> and release both keys. This will display the message "Setup Complete Changes saved".

USB Interface

Steps: After downloading and installing the Universal Programmer software, you will want to run it and follow the steps below:

When the programmer is loaded into memory it will load the default configuration and you will be presented with a screen that shows "Configuration currently at default!". This is referring to the configuration that is currently loaded in memory on the computer but not the one in the reader.
Either click on the Send MSR button or select the File Menu and choose Send Configuration. The reader will beep and you will see a progress bar run across the window indicating that the configuration is being sent to the reader.

Note: Currently QuickBooks does not use OPOS drivers to interface with the Credit Card Readers however if in the future they do implement OPOS setup for card readers please visit the OPOS section for installation notes for OPOS mode.