PC
Charge is credit card processing software that is integrated in a number of
applications.
By default both our PS/2 and USB Interface card readers will
work with their software. If however, your reader has been modified and
does not work properly with PC Charge you may follow these steps to configure
them to work.
PS/2 Interface
Steps: With your keyboard connected to the card reader
and using Windows notepad or some other
program you can type in, follow these steps:
-
<Left Ctrl>
<CapsLock> <Right Shift> <Backspace> This will display the prompt "Press F1-F10 for
options"
-
Now press the F10 and
the reader will display "Reset All Defaults: Yes"
-
Press
the <Enter> key to reset unit.
-
Press F1 and use the <Down Arrow> keys to
display the "Send Numerics As:" option.
-
Use your <Right Arrow> to configure the
reader to use "MAIN KEYBOARD KEYS"
-
Now press and hold down
the following keys: <Left Ctrl> <Escape> and release both
keys. This will display the message "Setup Complete Changes
saved".
USB Interface
Steps: After downloading and installing the Universal
Programmer software, you will want to run it and follow the steps
below:
-
When the programmer is
loaded into memory it will load the default configuration and you will be
presented with a screen that shows "Configuration currently at default!".
This is referring to the configuration that is currently loaded in memory on
the computer but not the one in the reader.
-
Press F1 to display the Interface settings
dialog.
-
Move your mouse or use the <Tab> key to
move the current input focus to "Send Numerics As" and change the setting to
MAIN KEYBOARD KEYS.
-
Click Ok to save the settings in memory.
-
Either click on the
Send MSR button or select the File Menu and choose Send
Configuration. The reader will beep and you will see a progress
bar run across the window indicating that the configuration is being sent to
the reader.
Online Support Assistant