BizTracker Software provides a
comprehensive management system for your business. The software ranges from
Point of Sale modules to full Back Office systems with full
integration.
Both ouir PS/2 and USB
Interface readers will operate with their software
however they need to be configured to send only Track 2 of the credit card
information, follow the steps below to configure the readers for use with the
software:
PS/2 Interface
Steps: With your keyboard connected to the card reader
and using Windows notepad or some other
program you can type in, follow these steps:
-
<Left Ctrl>
<CapsLock> <Right Shift> <Backspace> This will display the prompt "Press F1-F10 for
options"
-
Now press the F2 key
and the reader will prompt "Enable Tracks: "
-
Press the right arrow
until the option displays "Enable Tracks: 2" for Track 2 only.
-
Now press and hold down
the following keys: <Left Ctrl> <Escape> and release both
keys. This will display the message "Setup Complete Changes
saved".
USB Interface
Steps: After downloading and installing the Universal
Programmer software you will want to run it and follow the steps
below:
-
Press F2 to display
the Magstripe settings dialog.
-
Use the Tab key or the
mouse to position the cursor over the Enable Tracks setting and set
it to 2.
- Once you get the setting Click on the Ok
button to save in memory.
-
If the software does not prompt you to send the
configuration to the reader you may click on the Send button on the Toolbar or
you may choose the Send Configuration option from the File menu. The
reader will beep and you will see a progress bar run across the window
indicating that the configuration is being sent to the
reader.
Online Support Assistant